ZS-Door
ZS-Door-002
| Quantity: | |
|---|---|
Mexico Metal Rolling Slat Panel Roller Shutter Door Roll Forming Machine
Customized roller shutter door roll forming machine for Mexico customer. They offered drawing to us,then our rich experience engineer design rollers. This machine is produce thickness within 0.6-1.0mm.
All stations use casting frame, it is without cutting and welding, so will be in high precision forming profiles. And we mark numbers for all stations to make they are clear when we help customer to solve after sell service.
We can engrave flowers on rollers to forming door panel in clear pattern.
Design 1
Design 2
We will be test each machine before delivery.
Door Shutter Roll Forming Machine mainly consists of decoiler, roll forming machine, cut-off device, run-out table and electrical control panel.
Specification:
No. | Item | Unit | |
Roller Shutter Door Roll Forming Machine | |||
1. | Material Of Processing | Galvanized Steel | |
2. | Profile Type | As customer’s request | |
3. | Feed coil Thickness | mm | 0.6-1.0 |
4. | Y.S | M pa | 300 - 650 |
5. | Solid Shaft Material | High Grade, 45# Steel, Quenching & Tempering treatment | |
6. | Shaft Diameter | mm | 50 |
7. | Roll Station | No. | 15 |
8. | Rolling material | Cr12 | |
9. | Treatment of roller | mm | Hard chromize coated 0.05 - 0.08 |
10. | Line Speed | About 12-15 m/min | |
11. | Drive Type of Roll Forming Machine | Chain | |
12. | Power of Main Motor | kw | 7.5 |
Cutting Machine | |||
13. | Type | PLC controlled Hydraulic Cutting | |
14. | Thickness capacity | mm | 0.6-1.0 |
15. | Width capacity | mm | As drawing |
16. | Cutting blade steel grade | Cr12, quenching | |
17. | Hardness | 58-62 HRC | |
18. | Cutting tolerance | mm | +/- 1 |
Control Unit | |||
19. | Type | PLC controlled | |
20. | PLC brand | Delta | |
21. | Frequency conveter | Delta | |
22. | Frequency converter power | kw | 4 |
23. | Dimension Of Machine | About 5m*0.75m*1.4m | |
24. | Weight | kgs | 2900 |
Customize Design：
We can make many kinds of roller shutter door roll forming machine, these drawings for your reference.
Use:
It is a door with many jointed door pieces connected in series. In a fixed slide, the door rotates up and down with the scroll above the door as the center. Rolling shutters are suitable for public places or residences such as commercial facades, garages, shopping malls, hospitals, factories and mines.
Mexico Metal Rolling Slat Panel Roller Shutter Door Roll Forming Machine
Customized roller shutter door roll forming machine for Mexico customer. They offered drawing to us,then our rich experience engineer design rollers. This machine is produce thickness within 0.6-1.0mm.
All stations use casting frame, it is without cutting and welding, so will be in high precision forming profiles. And we mark numbers for all stations to make they are clear when we help customer to solve after sell service.
We can engrave flowers on rollers to forming door panel in clear pattern.
Design 1
Design 2
We will be test each machine before delivery.
Door Shutter Roll Forming Machine mainly consists of decoiler, roll forming machine, cut-off device, run-out table and electrical control panel.
Specification:
No. | Item | Unit | |
Roller Shutter Door Roll Forming Machine | |||
1. | Material Of Processing | Galvanized Steel | |
2. | Profile Type | As customer’s request | |
3. | Feed coil Thickness | mm | 0.6-1.0 |
4. | Y.S | M pa | 300 - 650 |
5. | Solid Shaft Material | High Grade, 45# Steel, Quenching & Tempering treatment | |
6. | Shaft Diameter | mm | 50 |
7. | Roll Station | No. | 15 |
8. | Rolling material | Cr12 | |
9. | Treatment of roller | mm | Hard chromize coated 0.05 - 0.08 |
10. | Line Speed | About 12-15 m/min | |
11. | Drive Type of Roll Forming Machine | Chain | |
12. | Power of Main Motor | kw | 7.5 |
Cutting Machine | |||
13. | Type | PLC controlled Hydraulic Cutting | |
14. | Thickness capacity | mm | 0.6-1.0 |
15. | Width capacity | mm | As drawing |
16. | Cutting blade steel grade | Cr12, quenching | |
17. | Hardness | 58-62 HRC | |
18. | Cutting tolerance | mm | +/- 1 |
Control Unit | |||
19. | Type | PLC controlled | |
20. | PLC brand | Delta | |
21. | Frequency conveter | Delta | |
22. | Frequency converter power | kw | 4 |
23. | Dimension Of Machine | About 5m*0.75m*1.4m | |
24. | Weight | kgs | 2900 |
Customize Design：
We can make many kinds of roller shutter door roll forming machine, these drawings for your reference.
Use:
It is a door with many jointed door pieces connected in series. In a fixed slide, the door rotates up and down with the scroll above the door as the center. Rolling shutters are suitable for public places or residences such as commercial facades, garages, shopping malls, hospitals, factories and mines.
